By-Pass Filter Installation on an AMC Gremlin Picture 4
A closer view of the filter mount as it sits in the recess. What a great fit! Note that I added extra washers not supplied by the Amsoil BMK-11 mounting kit. One of the reasons for this was to keep the bolts from protruding out into the wheel well too far and possibly having contact with the coil spring. I had between 3/8 to 1/2 inch, but on a bumpy road things could get busy, so I saw no problem with adding the washers to limit the distance the bolts protrude out the other side.

arrowBack (1K)Previous Picture arrowNext (1K)Next Picture